Pipe Fitter's Math Guide

Author: Johnny E. Hamilton
Publisher: N.A
ISBN: 9780962419706
Category: Mathematics
Page: 152
View: 3916

Continue Reading →

For those who work with cylinders, a geometric understanding of the shapes involved and how they fit together are crucial for excellence in their trade. This book allows pipe fitters to connect their work to its logical base -- maths. The straightforward tone, multitude of illustrations, and example problems will help even those with underdeveloped maths skills learn the calculations. Forty-one sets of exercises with answers give the reader ample practice as well as applying the maths skills.

Plumber's and Pipe Fitter's Calculations Manual

Author: R. Woodson
Publisher: McGraw-Hill Education
ISBN: 9780071448680
Category: Technology & Engineering
Page: 326
View: 4280

Continue Reading →

Here are portable, quick-look-up answers to the most common math problems faced by plumbers, pipelayers, pipefitters, and steamfitters. This time-saving reference allows users to get results instantly without putting pencil to paper or fiddling with a calculator. Job-simplifying Fast Code Facts and Sensible Shortcut boxes Packed with calculations, formulas, charts and tables NEW CHAPTER on estimating take-offs Great for designing or estimating a project

Pipefitters Handbook

Author: Forrest R. Lindsey
Publisher: Industrial Press Inc.
ISBN: 9780831130190
Category: Technology & Engineering
Page: 464
View: 7415

Continue Reading →

Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.

Mathematics for Plumbers and Pipefitters

Author: Lee Smith
Publisher: Cengage Learning
ISBN: 1111642605
Category: Mathematics
Page: 288
View: 3481

Continue Reading →

Now in its 8th edition, MATHEMATICS FOR PLUMBERS AND PIPEFITTERS delivers the essential math skills necessary in the plumbing and pipefitting professions. Starting with a thorough math review to ensure a solid foundation, the book progresses into specific on-the-job applications, such as pipe length calculations, sheet metal work, and the builder's level.Broad-based subjects like physics, volume, pressures, and capacities round out your knowledge, while a new chapter on the business of plumbing invites you to consider an exciting entrepreneurial venture. Written by a Master Plumber and experienced vocational educator, MATHEMATICS FOR PLUMBERS AND PIPEFITTERS, 8th Edition includes a multitude of real-world examples, reference tables, and formulas to help you build a rewarding career in the plumbing and pipefitting trade. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Audel Pipefitter's and Welder's Pocket Manual

Author: Charles N. McConnell
Publisher: John Wiley & Sons
ISBN: 0764542052
Category: Technology & Engineering
Page: 336
View: 3893

Continue Reading →

This little book is big on answers Whether you're an apprentice in the piping trades or a seasoned tradesperson, you'll find this completely revised and updated guide has answers to the questions you'll encounter on the job. Get current, concise facts on * Metrics and conversions * Tungsten inert gas welding and arc welding * Steam heating, hot water, refrigeration, and air conditioning systems * Grooved end/plain end piping systems * Process piping using plastics * Automatic fire protection systems * Terms, BTU fuel values, abbreviations, angle calculations, and more

Pipe Layout Helps

For the Pipefitter and Welder
Author: C. L. Hart
Publisher: N.A
ISBN: 9780962419744
Category: Reference
Page: 75
View: 1125

Continue Reading →

Provides basic information on the commonly used and difficult fabricating problems.

Plumber's Handbook

Author: Howard C. Massey
Publisher: Craftsman Book Company
ISBN: 9781572180567
Category: House & Home
Page: 350
View: 1470

Continue Reading →

This revised edition explains in simple terms how to install plumbing systems that will pass inspection - the first time. Every chapter is clearly illustrated with diagrams, charts and tables that make it easy to select the right material and install it correctly.It covers all of the plumber's trade: vents, waste piping, drainage, septic tanks, hot and cold water supply systems, wells, fire protection piping, fixtures, solar energy systems, gas piping and more.

The Pipe Fitter's and Pipe Welder's Handbook

Author: McGraw-Hill Education
Publisher: McGraw-Hill Education
ISBN: 9780028025001
Category: Technology & Engineering
Page: 208
View: 4301

Continue Reading →

This handy reference is an ideal companion to Pipe Trades Pocket Manual by the same author. This book enables pipefitters to solve difficult problems they will face in their work by providing instructions and calculations for common and unusual tasks.

The Ultimate Pipe Handbook for Pipefitters and Welders

Author: Rick Eisenbarth
Publisher: CreateSpace
ISBN: 9781514256497
Page: 184
View: 9232

Continue Reading →

This book was designed to ease the mind for pipefitters and welders and to simplify the layout of offsets and angles for the beginner as well as the novice. This book will help you understand how easy it is to layout offsets and angles. Also included in this book are charts showing you the take-off dimensions of pipefittings, flanges, etc. up to 42" and 48" diameter pipe along with gasket information.


Trainee Guide
Author: National Center for Construction Education and Research (U.S.)
Publisher: Prentice Hall
ISBN: 9780136144298
Category: Pipe fitting
Page: 296
View: 4257

Continue Reading →

This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Advanced Blueprint Reading, Advanced Pipe Fabrication, Stress Relieving and Aligning, Steam Traps, In-Line Specialties, Special Piping, Hot Taps, Maintaining Valves, and Introduction to Supervisory Roles. Instructor Supplements Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx. Annotated Instructor's Guide Paperback 0-13-614430-6 Computerized Testing Software 0-13-614782-8 Transparency Masters 0-13-614798-4 PowerPoint® Presentation Slides 0-13-608659-4

The Ultimate of Offsets Made Easy for Pipefitters and Welders

Author: Rick Eisenbarth
Publisher: CreateSpace
ISBN: 9781514256138
Page: 108
View: 4863

Continue Reading →

This book was created to ease the mind and to simplify the use of offsets and angles to where the beginner as well as the novice pipefitter and welder will understand how easy it is to layout and understand how to calculate offsets and angles. This book will help you understand the everyday tasks of pipe fabrication. On each page I walk you through step by step and show you the formula's for calculating that type of offset. This way, if you have an odd angle or offset that is not shown, you can calculate it with ease by using that same type of formula. This book is designed to help you understand how to layout common and uncommon angles and offsets. Pipefitting and fabrication of piping is basically simple, if you understand the concepts. This book is designed to help you understand these concepts.

Pipe Drafting and Design

Author: Roy A. Parisher,Robert A. Rhea
Publisher: Gulf Professional Publishing
ISBN: 012384701X
Category: Technology & Engineering
Page: 418
View: 965

Continue Reading →

Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters discuss the use of 3-D software tools from which elevation, section and isometric drawings, and bills of materials are extracted. Covers drafting and design of pipes from fundamentals to detailed advice on the development of piping drawings, using manual and CAD techniques 3-D model images provide an uncommon opportunity to visualize an entire piping facility Each chapter includes exercises and questions designed for review and practice New to this edition: A large scale project that includes foundation location, equipment location, arrangement, and vendor drawings Updated discussion and use of modern CAD tools Additional exercises, drawings, and dimensioning charts to provide practice and assessment New set of Powerpoint images to help develop classroom lectures

Blueprint Reading for Welders, Spiral bound Version

Author: A.E. Bennett,Louis J Siy
Publisher: Cengage Learning
ISBN: 1133605788
Category: Technology & Engineering
Page: 432
View: 6867

Continue Reading →

This hands-on, reader-friendly guide provides comprehensive, up-to-date coverage of welding symbols and their application to welding prints and practices. BLUEPRINT READING FOR WELDERS, Ninth Edition, uses step-by-step instructions and detailed illustrations to help you gain the knowledge and skills you need to interpret a wide range of working documents, from simple sketches to the most complex blueprints. The text covers auxiliary views, detail views, projections, sections, and detail and assembly drawings. Now updated and expanded, the new Ninth Edition features the latest AWS symbols and terms along with the ISO welding symbols,, current specifications and dimensioning practices, relevant industry developments, and cutting-edge information to support your professional success in this dynamic field. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.