Lubrication Fundamentals, Third Edition, Revised and Expanded


Author: Don M. Pirro,Martin Webster,Ekkehard Daschner
Publisher: CRC Press
ISBN: 1315359901
Category: Science
Page: 578
View: 2429

Continue Reading →

Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.

Lubrication Fundamentals, Second Edition


Author: Don M. Pirro,Ekkehard Daschner
Publisher: CRC Press
ISBN: 9781420029239
Category: Technology & Engineering
Page: 540
View: 685

Continue Reading →

Building on the cornerstone of the first edition, Lubrication Fundamentals Second Edition outlines the emergence of higher performance-specialty application oils and greases and emphasizes the need for lubrication and careful lubricant selection. Thoroughly updated and rewritten since the previous edition reached its 10th printing, the book discusses product basics, machine elements that require lubrication, methods of application, lubricant storage and handling, and lubricant conservation. Keeping the characteristics that made the first edition a classic reference, this second edition provides current information in the format readers have come to trust. About the authors . . . D. M. PIRRO is the Equipment Builder and OEM Manager, ExxonMobil Corporation, Fairfax, Virginia. The author or contributing editor of several scholarly articles on synthetic lubes, environmental awareness applications, grease technology, lubricant interchangeability, and oil analysis, Mr. Pirro is a Certified Lubrication Specialist and a member of the Society of Tribologists and Lubrication Engineers and the Association of Manufacturing Technology. He received the B.S. degree (1978) in mechanical engineering and the B.A. degree (1978) in business administration from Rutgers University, New Brunswick, New Jersey. A. A. WESSOL is a part-time Lubrication Consultant for the ExxonMobil Corporation in Manassas, Virginia. Mr. Wessol retired from the Mobil Corporation after 24 years in various advanced technical positions. The author or coauthor of numerous professional papers on the environmental aspects of lubrication, plant engineering, hydraulics, and pneumatics, he received the B.S. degree (1972) in mathematics, physics, and chemistry from the University of Pittsburgh, Pennsylvania.

Lubricant Additives

Chemistry and Applications, Third Edition
Author: Leslie R. Rudnick
Publisher: CRC Press
ISBN: 1351646966
Category: Science
Page: 707
View: 1411

Continue Reading →

This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.

Practical Lubrication for Industrial Facilities


Author: Heinz P. Bloch
Publisher: The Fairmont Press, Inc.
ISBN: 0881735809
Category: Technology & Engineering
Page: 465
View: 4391

Continue Reading →

Completely revised, this new edition includes the latest material on oil analysis, the energy conservation aspects of lube oil application and selection and bearing protector seals. Information on synthesized hydrocarbons and oil mist lubrication is thoroughly revised. It addresses the full scope of industrial lubricants, including general purpose oils, hydraulic fluids, food-grade and environmentally friendly lubricants, synthetic lubricants, greases, pastes, waxes and tribosystems. Detailed coverage is provided on lubrication strategies for electric motor bearings, gear lubrication, compressors and gas engines, and steam and gas turbines. Other topics include proper lubricant handling and storage, as well as effective industrial plant oil analysis practices.

Lubricants and Lubrication


Author: Mang,Wilfried Dresel
Publisher: John Wiley & Sons
ISBN: 3527645586
Category: Science
Page: 1100
View: 6194

Continue Reading →

Praise for the previous edition: “Contains something for everyone involved in lubricant technology” — Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants

Lubrication and Maintenance of Industrial Machinery

Best Practices and Reliability
Author: Robert M. Gresham,George E. Totten
Publisher: CRC Press
ISBN: 9781420089363
Category: Technology & Engineering
Page: 284
View: 1392

Continue Reading →

A-Z Guide for Maximum Cost Reduction and Increased Equipment Reliability To remain globally competitive, today’s manufacturing operations have greatly improved, but there is one last link in the advancement evolution. The reliability of manufacturing equipment must be improved in order to maximize the productive life of the equipment, eliminate unscheduled shut downs, and reduce operating costs. These are key components to maintaining a smooth work flow and a competitive edge. Written by peer-recognized industry experts, Lubrication and Maintenance of Industrial Machinery: Best Practices and Reliability provides the necessary tools for maintenance professionals who are responsible for the overall operational functions. With chapters culled from the second edition of the Handbook of Lubrication and Tribology, Volume 1 and a new introductory chapter, this more specialized and focused work supplies critical lubrication information that can be used on a daily basis to achieve greater machine reliability. Incorporating lean methods, this resource can be used by everyone involved in the production process, from supervisors to floor personnel. Recommended for STLE’s Certified Lubrication Specialist® Certification In addition to lubrication program development and scheduling, this volume also covers critical elements of the reliability equation, such as: Deterioration detection and measurement Lubrication cleanliness and contamination control Environmental implications of various lubricants Energy conservation Storage and handling Recycling of used oils This book fills a niche by specifically and comprehensively focusing on lubrication as part of the overall maintenance program. Under the editorial guidance of two of the most respected names in the field, this seminal work is destined to become an industry standard.

Lubrication Fundamentals, Second Edition


Author: Don M. Pirro,Ekkehard Daschner
Publisher: CRC Press
ISBN: 9781420029239
Category: Technology & Engineering
Page: 540
View: 8099

Continue Reading →

Building on the cornerstone of the first edition, Lubrication Fundamentals Second Edition outlines the emergence of higher performance-specialty application oils and greases and emphasizes the need for lubrication and careful lubricant selection. Thoroughly updated and rewritten since the previous edition reached its 10th printing, the book discusses product basics, machine elements that require lubrication, methods of application, lubricant storage and handling, and lubricant conservation. Keeping the characteristics that made the first edition a classic reference, this second edition provides current information in the format readers have come to trust. About the authors . . . D. M. PIRRO is the Equipment Builder and OEM Manager, ExxonMobil Corporation, Fairfax, Virginia. The author or contributing editor of several scholarly articles on synthetic lubes, environmental awareness applications, grease technology, lubricant interchangeability, and oil analysis, Mr. Pirro is a Certified Lubrication Specialist and a member of the Society of Tribologists and Lubrication Engineers and the Association of Manufacturing Technology. He received the B.S. degree (1978) in mechanical engineering and the B.A. degree (1978) in business administration from Rutgers University, New Brunswick, New Jersey. A. A. WESSOL is a part-time Lubrication Consultant for the ExxonMobil Corporation in Manassas, Virginia. Mr. Wessol retired from the Mobil Corporation after 24 years in various advanced technical positions. The author or coauthor of numerous professional papers on the environmental aspects of lubrication, plant engineering, hydraulics, and pneumatics, he received the B.S. degree (1972) in mathematics, physics, and chemistry from the University of Pittsburgh, Pennsylvania.

Finance and the Good Society


Author: Robert J. Shiller
Publisher: Princeton University Press
ISBN: 140084617X
Category: Business & Economics
Page: 312
View: 2774

Continue Reading →

The reputation of the financial industry could hardly be worse than it is today in the painful aftermath of the 2008 financial crisis. New York Times best-selling economist Robert Shiller is no apologist for the sins of finance--he is probably the only person to have predicted both the stock market bubble of 2000 and the real estate bubble that led up to the subprime mortgage meltdown. But in this important and timely book, Shiller argues that, rather than condemning finance, we need to reclaim it for the common good. He makes a powerful case for recognizing that finance, far from being a parasite on society, is one of the most powerful tools we have for solving our common problems and increasing the general well-being. We need more financial innovation--not less--and finance should play a larger role in helping society achieve its goals. Challenging the public and its leaders to rethink finance and its role in society, Shiller argues that finance should be defined not merely as the manipulation of money or the management of risk but as the stewardship of society's assets. He explains how people in financial careers--from CEO, investment manager, and banker to insurer, lawyer, and regulator--can and do manage, protect, and increase these assets. He describes how finance has historically contributed to the good of society through inventions such as insurance, mortgages, savings accounts, and pensions, and argues that we need to envision new ways to rechannel financial creativity to benefit society as a whole. Ultimately, Shiller shows how society can once again harness the power of finance for the greater good.

Intermolecular and Surface Forces


Author: Jacob N. Israelachvili
Publisher: Academic Press
ISBN: 9780080923635
Category: Science
Page: 710
View: 4490

Continue Reading →

This reference describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. · starts from the basics and builds up to more complex systems · covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels · multidisciplinary approach: bringing together and unifying phenomena from different fields · This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)

Synthetics, Mineral Oils, and Bio-Based Lubricants

Chemistry and Technology, Second Edition
Author: Leslie R. Rudnick
Publisher: CRC Press
ISBN: 1439855374
Category: Science
Page: 1008
View: 6966

Continue Reading →

Highlighting the major economic and industrial changes in the lubrication industry since the first edition, Synthetics, Mineral Oils, and Bio-Based Lubricants, Second Edition outlines the state of the art in each major lubricant application area. Chapters cover trends in the major industries, such as the use of lubricant fluids, growth or decline of market areas and applications, potential new applications, production capacities, and regulatory issues, including biodegradability, toxicity, and food production equipment lubrication. In a single, unique volume, Synthetics, Mineral Oils, and Bio-Based Lubricants, Second Edition offers property and performance information of fluids, theoretical and practical background to their current applications, and strong indicators for global market trends that will influence the industry for years to come.

Permanent Magnet Motor Technology

Design and Applications, Third Edition
Author: Jacek F. Gieras
Publisher: CRC Press
ISBN: 1439859019
Category: Technology & Engineering
Page: 608
View: 6392

Continue Reading →

The importance of permanent magnet (PM) motor technology and its impact on electromechanical drives has grown exponentially since the publication of the bestselling second edition. The PM brushless motor market has grown considerably faster than the overall motion control market. This rapid growth makes it essential for electrical and electromechanical engineers and students to stay up-to-date on developments in modern electrical motors and drives, including their control, simulation, and CAD. Reflecting innovations in the development of PM motors for electromechanical drives, Permanent Magnet Motor Technology: Design and Applications, Third Edition demonstrates the construction of PM motor drives and supplies ready-to-implement solutions to common roadblocks along the way. This edition supplies fundamental equations and calculations for determining and evaluating system performance, efficiency, reliability, and cost. It explores modern computer-aided design of PM motors, including the finite element approach, and explains how to select PM motors to meet the specific requirements of electrical drives. The numerous examples, models, and diagrams provided in each chapter facilitate a lucid understanding of motor operations and characteristics. This 3rd edition of a bestselling reference has been thoroughly revised to include: Chapters on high speed motors and micromotors Advances in permanent magnet motor technology Additional numerical examples and illustrations An increased effort to bridge the gap between theory and industrial applications Modified research results The growing global trend toward energy conservation makes it quite possible that the era of the PM brushless motor drive is just around the corner. This reference book will give engineers, researchers, and graduate-level students the comprehensive understanding required to develop the breakthroughs that will push this exciting technology to the forefront.

Principles of Colloid and Surface Chemistry, Third Edition, Revised and Expanded


Author: Paul C. Hiemenz,Raj Rajagopalan
Publisher: CRC Press
ISBN: 135199073X
Category: Science
Page: 672
View: 5272

Continue Reading →

This work aims to familiarize students with the fundamentals of colloid and surface science, from various types of colloids and colloidal phenomena, and classical and modern characterization/measurement techniques to applications of colloids and surface science in engineering, technology, chemistry, physics and biological and medical sciences. The Journal of Textile Studies proclaims "High praise from peers . . .contains valuable information on many topics of interest to food rheologists and polymer scientists ...[The book] should be in the libraries of academic and industrial food research organizations" and Chromatographia describes the book as "...an excellent textbook, excellently organised, clearly written and well laid out."

Fundamentals of Metal Machining and Machine Tools, Third Edition


Author: Winston A. Knight,Geoffrey Boothroyd
Publisher: CRC Press
ISBN: 9781574446593
Category: Technology & Engineering
Page: 602
View: 6446

Continue Reading →

In the more than 15 years since the second edition of Fundamentals of Machining and Machine Tools was published, the industry has seen many changes. Students must keep up with developments in analytical modeling of machining processes, modern cutting tool materials, and how these changes affect the economics of machining. With coverage reflecting state-of-the-art industry practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes underlying concepts, analytical methods, and economic considerations, requiring only basic mathematics and physics. This book thoroughly illustrates the causes of various phenomena and their effects on machining practice. The authors include several descriptions of modern analytical methods, outlining the strengths and weaknesses of the various modeling approaches. What's New in the Third Edition? Recent advances in super-hard cutting tool materials, tool geometries, and surface coatings Advances in high-speed machining and hard machining New trends in cutting fluid applications, including dry and minimum-quantity lubrication machining New developments in tool geometries for chip breaking and chip control Improvements in cost modeling of machining processes, including application to grinding processes Supplying abundant examples, illustrations, and homework problems, Fundamentals of Machining and Machine Tools, Third Edition is an ideal textbook for senior undergraduate and graduate students studying metal cutting, machining, machine tool technology, machining applications, and manufacturing processes.

Formulas and Calculations for Drilling, Production, and Workover

All the Formulas You Need to Solve Drilling and Production Problems
Author: William C. Lyons,Thomas Carter,Norton J. Lapeyrouse
Publisher: Gulf Professional Publishing
ISBN: 0128034300
Category: Science
Page: 394
View: 3512

Continue Reading →

Formulas and Calculations for Drilling, Production, and Workover, All the Formulas You Need to Solve Drilling and Production Problems, Fourth Edition provides a convenient reference for oil field workers who do not use formulas and calculations on a regular basis, aiming to help reduce the volume of materials they must carry to the rig floor or job site. Starting with a review of basic equations, calculations, and featuring many examples, this handy reference offers a quick look-up of topics such as drilling fluids, pressure control, engineering calculations, and air and gas calculations. The formulas and calculations are provided in either English field units or in metric units. This edition includes additional coverage on cementing, subsea considerations, well hydraulics, especially calculating for hydraulic fracturing methods, and drill string design limitations. This practical guide continues to save time and money for the oil field worker or manager, with an easy layout and organization to help confidently conduct operations and evaluate the performance of wells on-the-go. Features a new chapter focused on cementing Includes on-the-job answers and formulas for today’s hydraulic fracturing methods Provides extra utility with an online basic equation calculator for 24/7 problem-solving access Covers topics such as drilling fluids, pressure control, engineering calculations, and air and gas calculations

Fundamental Mechanics of Fluids, Third Edition


Author: Iain G. Currie,I.G. Currie
Publisher: CRC Press
ISBN: 0824745655
Category: Technology & Engineering
Page: 548
View: 2925

Continue Reading →

Retaining the features that made previous editions perennial favorites, Fundamental Mechanics of Fluids, Third Edition illustrates basic equations and strategies used to analyze fluid dynamics, mechanisms, and behavior, and offers solutions to fluid flow dilemmas encountered in common engineering applications. The new edition contains completely reworked line drawings, revised problems, and extended end-of-chapter questions for clarification and expansion of key concepts. Includes appendices summarizing vectors, tensors, complex variables, and governing equations in common coordinate systems Comprehensive in scope and breadth, the Third Edition of Fundamental Mechanics of Fluids discusses: Continuity, mass, momentum, and energy One-, two-, and three-dimensional flows Low Reynolds number solutions Buoyancy-driven flows Boundary layer theory Flow measurement Surface waves Shock waves

Fundamentals of Fluid Film Lubrication


Author: Bernard J. Hamrock,Steven R. Schmid,Bo O. Jacobson
Publisher: CRC Press
ISBN: 1135537763
Category: Technology & Engineering
Page: 728
View: 649

Continue Reading →

Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.

Ball and roller bearings

theory, design, and application
Author: Johannes Brändlein
Publisher: Wiley
ISBN: 9780471984528
Category: Technology & Engineering
Page: 630
View: 7218

Continue Reading →

This book is the third edition of the standard work for all engineers concerned with rolling bearings - in design and development; in production and operation; in maintenance and repair; in purchasing and materials management. Fully revised, features new to this edition include: * coverage of the new 'adjusted life' calculation, which takes into account the endurance strength of rolling bearings in relation to factors such as the cleanliness of the lubricant and the design of the bearing housing using the flow of force * expanded chapter on lubrication The information in this book will help bearing engineers make real-life improvements to the capacity and operational reliability of bearings in vehicles, machines, equipment and plants, saving on both time and costs. This book is an essential reference to the fundamental correlations of bearing engineering, and to all aspects of bearing design and technology.

Industrial Noise Control

Fundamentals and Applications, Second Edition
Author: Bell
Publisher: Routledge
ISBN: 1351438735
Category: Technology & Engineering
Page: 682
View: 8124

Continue Reading →

Illustrates the latest solutions to real problems occurring in industry, buildings, and communities. Second Edition offers many more 13roblem sets and end-of-chapter exercises as well as up-to-the-minute coverage of new topics.

Clinical Ocular Pharmacology


Author: Jimmy D. Bartlett
Publisher: Elsevier
ISBN: 1483193918
Category: Medical
Page: 944
View: 753

Continue Reading →

Clinical Ocular Pharmacology, Second Edition covers the diagnostic and therapeutic clinical procedures in the administration of drugs to the eye. This book is organized into five parts encompassing 35 chapters that evaluate the basic pharmacologic principles that govern the different types of ophthalmic drugs. It addresses the pharmacologic agents useful in the diagnosis and treatment of ocular diseases. Some of the topics covered in the book are the basic science of ocular pharmacology; clinical administration of ocular drugs; drugs affecting the autonomic nervous system; types of local anesthetics; review of anti-inflammatory drugs; and examination of inhibitors of aqueous formation. Other parts deal with the development of contact lens solution in clinical practice and the pharmacologic management of strabismus. These topics are followed by discussions of the legal basis of using drugs in optometry and the systemic effects of ocular drugs. The concluding part is devoted to the diseases of the optic nerve. The book can provide useful information to doctors, optometrists, pediatricians, students, and researchers.