1997 Masonry Codes and Specifications


Author: John Chrysler,Thomas Escobar
Publisher: CRC Press
ISBN: 9780849375484
Category: Technology & Engineering
Page: 464
View: 2164

Continue Reading →

The Masonry Institute of America believes that the best way to extend and improve the use of masonry is through education and dissemination of information. Following a long tradition of such ideals, the 1997 Masonry Codes and Specifications is a ready reference that furnishes, in one document, the various code requirements for masonry from the Uniform Building Code and Standards, the California State Building Code, and the American Society for Testing and Materials (ASTM) Standards that govern the specification of quality and testing of materials. The book includes Guide Specifications for masonry construction set forth in the CSI format with notes to the specifier.

Construction Materials

Their Nature and Behaviour, Third Edition
Author: J.M. Illston,Peter Domone
Publisher: CRC Press
ISBN: 9780419258605
Category: Technology & Engineering
Page: 584
View: 4867

Continue Reading →

Thoroughly revised and updated, the third edition of this popular textbook continues to provide a comprehensive coverage of the main construction materials for undergraduate students of civil engineering and construction related courses. It creates an understanding of materials and how they perform through a knowledge of their chemical and physical structure, leading to an ability to judge their behaviour in service and construction. Materials covered include; metals and alloys, concrete, bituminous materials, brickwork and blockwork, polymers and fibre composites. Each material is discussed in terms of: structure; strength and failure; durability; deformation; practice and processing. The sections on concrete, polymers and fibre composites have been significantly revised. Descriptions of important properties are related back to the structure and forward to basic practical considerations. With its wealth of illustrations and reader-friendly style and layout Construction Materials.

2009 IBC Handbook Structural Provisions, ICC International Code Council, 2009

2009 IBC Handbook Structural Provisions,
Author: Structural Engineers Association USA
Publisher: Bukupedia
ISBN: N.A
Category: Technology & Engineering
Page: 696
View: 8237

Continue Reading →

Internationally, code officials recognize the need for a modern, up-to-date building code addressing the design and installation of building systems through requirements emphasizing performance. The 2009 International Building Code® (IBC®) is designed to meet those needs through model code regulations that safeguard the public health and safety in all communities, large and small. This comprehensive code establishes minimum regulations for building systems using prescriptive and performance-based provisions. It is founded on broad-based principles that make possible the use of alternate materials as well as new, improved design methodologies. The changes in the structural provisions of the 2009 IBC when compared to previous editions of the IBC and legacy codes (Uniform Building Code, National Building Code, Standard Building Code) create the need for a comprehensive work that discusses the changes and expands on many of the new or improved provisions. This book, the 2009 IBC Handbook—Structural Provisions, is intended to do just that. By helping code users understand and properly apply the structural provisions in Chapters 16 through 23 of the 2009 IBC, this handbook is a valuable resource for those who design, plan review, inspect or construct buildings or other structures regulated by the 2009 IBC. Although it will prove useful to a broad range of individuals, it was written primarily so that architects, engineers and code officials can understand the IBC’s provisions and gain insight into their underlying basis and intent. To that end, the handbook’s numerous figures, tables and examples help clarify and illustrate the proper application of many code provisions. One of the significant differences between the structural provisions in the UBC and the IBC is that the IBC adopts national (structural) standards by reference rather than transcribing the structural provisions of the standards into the code itself. This is true for structural loads as well as structural materials. This trend has continued with each subsequent edition of the IBC to the extent that the 2009 IBC relies on the referenced standards even more than the previous editions. Therefore, in many cases the discussion in this handbook pertains to the provisions in the referenced standard rather than the IBC itself. The 2009 IBC Handbook—Structural Provisions covers four major structural categories: 􀀍 Structural load effects and design provisions of Chapter 16 􀀍 Special inspection, structural testing and structural observation provisions of Chapter 17 􀀍 Foundation and soil provisions of Chapter 18 􀀍 Specific structural material provisions for concrete, masonry, steel and wood in Chapters 19 through 23 As an added benefit to readers, ICC has included a CD-ROM containing the complete structural handbook as well as a variety of helpful resource documents such as 2003 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures with Accompanying Commentary (FEMA 450, Parts 1 and 2), NEHRP Recommended Provisions: Design Examples (FEMA 451), NEHRP Recommended Provisions for New Buildings and Other Structures: Training and Instructional Materials (FEMA 451B), Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public (FEMA 460), Homebuilders’ Guide to Earthquake-Resistant 􀀶􀁗􀁕􀁘􀁆􀁗􀁘􀁕􀁄􀁏 􀀳􀁕􀁒􀁙􀁌􀁖􀁌􀁒􀁑􀁖 􀁌􀁌􀁌 Preface Design and Construction (FEMA 232), Communicating with Owners and Managers of New Buildings on Earthquake Risk: A Primer for Design Professionals (FEMA 389), Designing for Earthquakes: A Manual for Architects (FEMA 454) and CodeMaster—2006 IBC Seismic Design—2006 IBC, 2003 NEHRP, ASCE 7-05. 􀁌􀁙 􀀕􀀓􀀓􀀜 􀀬􀀥􀀦 􀀫􀁄􀁑􀁇􀁅􀁒􀁒􀁎 About the International Code Council The International Code Council® (ICC®) is a nonprofit membership association dedicated to protecting the health, safety, and welfare of people by creating better buildings and safer communities. The mission of ICC is to provide the highest quality codes, standards, products and services for all concerned with the safety and performance of the built environment. ICC is the publisher of the family of the International Codes® (I-Codes®), a single set of comprehensive and coordinated model codes. This unified approach to building codes enhances safety, efficiency and affordability in the construction of buildings. The Code Council is also dedicated to innovation, sustainability and energy efficiency. Code Council subsidiary, ICC Evaluation Service, issues Evaluation Reports for innovative products and reports of Sustainable Attributes Verification and Evaluation (SAVE). Headquarters: 500 New Jersey Avenue, NW, 6th Floor, Washington, DC 20001-2070 District Offices: Birmingham, AL; Chicago. IL; Los Angeles, CA 1-888-422-7233 This book is dedicated to John Nosse, first president of ICC Evaluation Service; first and only president of ICBO Evaluation Service; a 45-year veteran of the model-code groups; a first-rate engineer, a dedicated code professional, and a respected leader; and, ever and always, a true gentleman. 􀀶􀁗􀁕􀁘􀁆􀁗􀁘􀁕􀁄􀁏

Concrete Masonry Designer's Handbook


Author: Anton Fried,J.J. Roberts,Alan Tovey
Publisher: CRC Press
ISBN: 1482271478
Category: Technology & Engineering
Page: 382
View: 2354

Continue Reading →

A new edition of a well-known and respected book. This book provides a thorough guide for structural engineers on the use of concrete masonry. The second edition of the Concrete Masonry Designer's Handbook is the only handbook to provide information on all the new CEN TC125 masonry standards, as well as detailed guidance on design to Eurocode 6. Throughout the book, detailed design examples are provided which will enable the designer to develop an understanding of the correct design approach. At key points in the book, table and design charts are provided to further facilitate the design process.

Structural Engineering

License Review with Problems and Solutions
Author: Alan Williams
Publisher: Kaplan AEC Engineering
ISBN: 9780793195688
Category: Architecture
Page: 565
View: 9797

Continue Reading →

Written for candidates preparing for the state-specific structural engineering examinations, this volume contains problems and solutions from recent exams. Candidates for the national Structural I and II exams can use this book in conjunction with the UBC-IBC Structural Comparison & Cross Reference found on page 22. The book is a comprehensive guide and reference for self-study.

Masonry

Concrete, Brick, Stone
Author: Christine Beall
Publisher: Creative Homeowner
ISBN: 9781880029862
Category: House & Home
Page: 174
View: 2583

Continue Reading →

Whether it's laying out a herringbone sidewalk, building a brick or stone garden wall, or making a circular driveway, this book teaches novice builders how to work with concrete, brick, and stone. Step-by-step instructions include over 540 color illustrations and photos.

Metal Building Systems Design and Specifications 2/E


Author: Alexander Newman
Publisher: McGraw Hill Professional
ISBN: 0071776648
Category: Technology & Engineering
Page: 576
View: 3651

Continue Reading →

* Reflects recent changes in the model building codes and in the MBMA (Metal Building Manual Association) manual * New review questions after each chapter * Revised data on insulation necessary to meet the new energy codes * New material on renovations of primary frames, secondary members, roofing, and walls

Timber Designers' Manual


Author: E. C. Ozelton,J. A. Baird
Publisher: John Wiley & Sons
ISBN: 0470690003
Category: Technology & Engineering
Page: 560
View: 1371

Continue Reading →

This major structural engineering manual covers overall detail design of structural timber and includes extensive tables and coefficients for speedy reference. The current edition takes account of revisions to BS 5268: Part 2 and outlines the new Eurocode on timber. It is available for the first time in paperback.

Uniform Building Code Compliance Manual

1997 Uniform Building Code
Author: Scott Parish
Publisher: McGraw Hill Professional
ISBN: 9780070486119
Category: Architecture
Page: 380
View: 6661

Continue Reading →

Make compliance with the Uniform Building Code a cinch with this complete set of project-oriented checklists. They decode the often arcane and unwieldly requirements of the UBC and reduce verification of code compliance to the simple act of running through a checklist. No matter what stage your project is in or what type of structure you're working on, this resource provides the needed time-saving, code-verifying tool. Divided into four major sections, this book/CD package gives you checklists for the design stage, architectural documentation, structural documentation, and specifications. Provided in both print and computer-ready format, these checklists simplify record-keeping as well as compliance. This valuable tool reduces the need for time-wasting design changes, expensive construction change orders, and worseÑclaims that can result from failure to design and build according to code. Concise and easy to read and to use, the Uniform Building Code Manual is your key to quick and complete verification.

Design of Blast Resistant Buildings in Petrochemical Facilities

First Edition
Author: Task Committee on Blast Resistant Design
Publisher: ASCE Publications
ISBN: 9780784402658
Category: Technology & Engineering
Page: 280
View: 6251

Continue Reading →

This report provides general guidelines in the structural design of blast resistant petrochemical facilities. Informational coverage is provided for OSHA requirements, design objectives, siting considerations, and load determination with references mentioned for more detailed information. More detailed coverage is provided for types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures. Typical details and ancillary considerations, such as doors and windows, are also included. A "how to" discussion on the upgrade of existing buildings is provided for older facilities which may not meet current needs. Three example calculations are included to illustrate design procedures.

NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures

Commentary
Author: Eugene Zeller
Publisher: DIANE Publishing
ISBN: 9780756706296
Category:
Page: 362
View: 9617

Continue Reading →

Chap. 1 sets forth the general require. for applying the analysis & design provisions contained in Chap. 2 through 12 of the Nat. Earthquake Hazards Reduction Prog. Recommended Provisions for Seismic Reg's. for New Bldgs. & Other Structures. It is similar to what might be incorporated in a code as administrative regulations. Also includes info. on: quality assurance; ground motion; structural design criteria; architectural, mechanical, & electrical components; seismically isolated structures; & design require. for foundation, steel structure, concrete structure, composite steel & concrete structure, masonry structure, wood structure, & non-building structures. Illustrated.

Properties of Water and Steam / Zustandsgrößen von Wasser und Wasserdampf

The Industrial Standard IAPWS-IF97 for the Thermodynamic Properties and Supplementary Equations for Other Properties / Der Industrie-Standard IAPWS-IF97 für die thermodynamischen Zustandsgrößen und ergänzende Gleichungen für andere Eigenschaften
Author: Wolfgang Wagner,Alfred Kruse
Publisher: Springer-Verlag
ISBN: 3662035294
Category: Technology & Engineering
Page: 354
View: 3575

Continue Reading →

FRP Reinforcement in RC Structures

Technical Report
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
ISBN: 2883940800
Category: Fiber-reinforced concrete
Page: 160
View: 362

Continue Reading →

Construction Inspection Handbook

Total Quality Management
Author: James J. O'Brien
Publisher: Springer Science & Business Media
ISBN: 1461560179
Category: Business & Economics
Page: 663
View: 7696

Continue Reading →

Since the publication of the third edition in 1989, changes in quality control/assurance have affected the construction industry. This new fourth edition includes revised and new material relating to Section A, specifically Total Quality Management, ISO 9000, and quality control. The Codes and Standards Section, Contract Documents, and Legal Documents Sections have also been extensively updated. Construction Inspection Handbook systematically reinstates the importance of quality by providing you with a comprehensive quality assurance plan. At the same time, this ensures that your construction projects meet contract specifications, comply with Construction Specification Institute standards, and conform with safety requirements and legal codes.

Keeping It Clean

Removing Exterior Dirt, Paint, Stains and Graffiti from Historic Masonry Buildings
Author: Anne E. Grimmer
Publisher: DIANE Publishing
ISBN: 9780941375634
Category: Architecture
Page: 34
View: 5060

Continue Reading →